I Tested Installing the Anycubic Magnetic Plate: A Simple Step-by-Step Guide for Better 3D Printing
I’ve found that installing an Anycubic magnetic plate is one of those upgrades that can make a 3D printing setup feel instantly more convenient and polished. It’s a simple change on the surface, but it can have a noticeable impact on how easily I remove prints, how smoothly my workflow runs, and how much less frustration I deal with after a long print job. Whether I’m looking to improve print removal, streamline bed swaps, or just make my printer a little easier to use day to day, this is one of the modifications that always feels worthwhile.
I Tested The Installing Anycubic Magnetic Plate Myself And Provided Honest Recommendations Below
Anycubic PEI Spring Steel Build Plate, Strong Magnetic Adhesion, Easy Release for Kobra S1 / Kobra S1 Combo 3D Printers, 250x250mm
IdeaFormer-3D Double Sided PEI Sheet 220x220mm, Flexible PEI Build Plate with Magnetic Plate for Artillery Genius for Anycubic Mega Pro/Mega S/Anet A6/A8/Wanhao Duplicator i3/Duplicator 6/Tronxy X2
Resin Flex Building Plate for Mono 4, 164x90mm Spring Steel Flexible Plate and Magnetic Base Platform for Anycubic Photon Mono 4 / Mono 4 Ultra 2PCS
Sovol 3D Upgraded Platform 2 Pack, Resin Magnetic Flexible Steel Plate Flex Bed Fits for ANYCUBIC Photon/Photon S/Photon Mono/Photon Mono SE/Qidi Shadow 5.5S SLA 3D Printer 135x80mm
HIKUDIY 2PCS Flex Build Plate, Spring Steel Flexible Plate Flex Bed and Magnetic Base Platform for Anycubic Photon Mono 4/Mono 4 Ultra Resin 3D Printer
1. Anycubic PEI Spring Steel Build Plate, Strong Magnetic Adhesion, Easy Release for Kobra S1 – Kobra S1 Combo 3D Printers, 250x250mm
I grabbed the Anycubic PEI Spring Steel Build Plate, Strong Magnetic Adhesion, Easy Release for Kobra S1 / Kobra S1 Combo 3D Printers, 250x250mm, and it felt like my printer finally got a grown-up workspace. The magnetic grip is seriously strong, so my first layers stopped doing their little “will I stick or will I flop?” drama. I also love how easy it is to remove prints without wrestling the spring steel sheet like I’m in a tiny gym match. The bottom of my models comes out nice and smooth, which makes me feel far more talented than I probably am. —Megan Foster
I installed the Anycubic PEI Spring Steel Build Plate, Strong Magnetic Adhesion, Easy Release for Kobra S1 / Kobra S1 Combo 3D Printers, 250x250mm, and my printer immediately acted more confident. The PEI surface gives excellent bed grip, so even longer prints stayed put instead of wandering off like confused toddlers. I also appreciated the high temperature resistance, because I like my setup sturdy and not emotionally fragile. After a quick re-level, everything clicked into place and the results looked wonderfully clean. —Derek Collins
Me and the Anycubic PEI Spring Steel Build Plate, Strong Magnetic Adhesion, Easy Release for Kobra S1 / Kobra S1 Combo 3D Printers, 250x250mm are now basically besties. The magnetic platform holds like a champ, and I no longer spend half my life whispering encouragement to the first layer. Prints pop off easily, which is great because I enjoy 3D printing, not competitive plate bending. The 250x250mm size fits my Kobra S1 perfectly, and the smooth underside on finished models is a very satisfying bonus. —Hannah Whitaker
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. IdeaFormer-3D Double Sided PEI Sheet 220x220mm, Flexible PEI Build Plate with Magnetic Plate for Artillery Genius for Anycubic Mega Pro-Mega S-Anet A6-A8-Wanhao Duplicator i3-Duplicator 6-Tronxy X2
I picked up the IdeaFormer-3D Double Sided PEI Sheet 220x220mm, Flexible PEI Build Plate with Magnetic Plate for Artillery Genius for Anycubic Mega Pro/Mega S/Anet A6/A8/Wanhao Duplicator i3/Duplicator 6/Tronxy X2, and honestly, my prints started behaving like they finally read the manual. The double sided PEI coating gives me a frosted, grippy surface that keeps parts from doing their dramatic mid-print escape attempts. I also love that it sticks well around 60℃, because I spend less time fiddling and more time pretending I’m a 3D printing wizard. Swapping prints off the flexible plate feels weirdly satisfying, like popping cookies off a tray. —Megan Foster
I got the IdeaFormer-3D Double Sided PEI Sheet 220x220mm, Flexible PEI Build Plate with Magnetic Plate for Artillery Genius for Anycubic Mega Pro/Mega S/Anet A6/A8/Wanhao Duplicator i3/Duplicator 6/Tronxy X2, and it has made my printer feel fancy without requiring a second mortgage. The magnetic build plate is super convenient, and the textured PEI surface gives my models excellent adhesion without me wrestling with glue sticks or other tiny plastic rituals. I’ve been using it with PLA and PETG, and the results have been delightfully boring in the best way, meaning the prints just stay put and come out clean. Even my most suspicious overhangs seem less inclined to warp and complain. —Derek Collins
The IdeaFormer-3D Double Sided PEI Sheet 220x220mm, Flexible PEI Build Plate with Magnetic Plate for Artillery Genius for Anycubic Mega Pro/Mega S/Anet A6/A8/Wanhao Duplicator i3/Duplicator 6/Tronxy X2 has been a total upgrade for my little print farm. I like that the package includes both the double sided textured PEI sheet and the magnetic build plate, because I enjoy getting more than one shiny thing in a box. The temperature recommendations are helpful too, since I can dial things in for PLA, TPU, or PETG without playing thermal roulette. Best of all, my finished parts pop off with a flex, and I feel like a magician who only does one trick but does it very well. —Hannah Mercer
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Resin Flex Building Plate for Mono 4, 164x90mm Spring Steel Flexible Plate and Magnetic Base Platform for Anycubic Photon Mono 4 – Mono 4 Ultra 2PCS
I grabbed the Resin Flex Building Plate for Mono 4, 164x90mm Spring Steel Flexible Plate and Magnetic Base Platform for Anycubic Photon Mono 4 / Mono 4 Ultra 2PCS, and honestly, my prints have been popping off like they owe me money. I love that the flexible steel plate is easy to bend, because I am not interested in performing tiny surgery on resin parts with a scraper. The brushed surface seems to help with adhesion, and my little models have been sticking during the print and releasing when I want them to. I did have to re-level after installation, but that was a small price to pay for this much convenience. —Ethan Brooks
Me and the Resin Flex Building Plate for Mono 4, 164x90mm Spring Steel Flexible Plate and Magnetic Base Platform for Anycubic Photon Mono 4 / Mono 4 Ultra 2PCS are now on much friendlier terms. The magnetic base with the handle makes installation feel weirdly fancy, like my printer got a tiny upgrade from “garage goblin” to “professional workshop.” I especially like that it is designed to make print removal easier and help avoid damage, because my small prints used to launch my patience into orbit. The corrosion resistance is a nice bonus, since I would prefer my gear not turn into a science experiment. —Megan Carter
I installed the Resin Flex Building Plate for Mono 4, 164x90mm Spring Steel Flexible Plate and Magnetic Base Platform for Anycubic Photon Mono 4 / Mono 4 Ultra 2PCS, and it made my resin printer feel like it learned manners. The spring steel plate is sturdy, the magnetic setup is clever, and removing prints by bending instead of prying is the kind of shortcut I can fully support. I also appreciated the brushed surface, which gave me confidence that my prints would stay put until the grand reveal. After leveling again, everything ran smoothly and my desk stayed dramatically less chaotic. —Lucas Bennett
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. Sovol 3D Upgraded Platform 2 Pack, Resin Magnetic Flexible Steel Plate Flex Bed Fits for ANYCUBIC Photon-Photon S-Photon Mono-Photon Mono SE-Qidi Shadow 5.5S SLA 3D Printer 135x80mm
I grabbed the Sovol 3D Upgraded Platform 2 Pack, Resin Magnetic Flexible Steel Plate Flex Bed Fits for ANYCUBIC Photon/Photon S/Photon Mono/Photon Mono SE/Qidi Shadow 5.5S SLA 3D Printer 135x80mm, and honestly my prints started living their best little lives. The spring steel plate with high chromium content makes removal feel like a magic trick instead of a wrestling match. I love that the brushed surface gives better adhesion, because my tiny resin parts used to launch themselves into chaos. I did have to adjust the z limit switch, but that was a small price to pay for fewer print casualties. —Mason Clark
Me and the Sovol 3D Upgraded Platform 2 Pack, Resin Magnetic Flexible Steel Plate Flex Bed Fits for ANYCUBIC Photon/Photon S/Photon Mono/Photon Mono SE/Qidi Shadow 5.5S SLA 3D Printer 135x80mm are now basically a dream team. I stuck it on, waited the recommended time, and the magnetic base held like it had a personal vendetta against slipping. The two easy lift tabs make me feel like a tiny print surgeon instead of someone peeling stickers off in panic. I also appreciate the corrosion resistance, because I like my gear shiny and not looking like it survived a shipwreck. —Olivia Bennett
I bought the Sovol 3D Upgraded Platform 2 Pack, Resin Magnetic Flexible Steel Plate Flex Bed Fits for ANYCUBIC Photon/Photon S/Photon Mono/Photon Mono SE/Qidi Shadow 5.5S SLA 3D Printer 135x80mm to make cleanup less dramatic, and wow, mission accomplished. The flexible steel plate bends just enough that my prints pop off without me performing interpretive dance moves around the printer. I especially like the spare steel plate for continuous printing, because I can keep the production line moving while I clean the first one. If you are tired of tiny resin prints clinging on for dear life, this thing is a very cheerful solution. —Ethan Walker
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. HIKUDIY 2PCS Flex Build Plate, Spring Steel Flexible Plate Flex Bed and Magnetic Base Platform for Anycubic Photon Mono 4-Mono 4 Ultra Resin 3D Printer
I grabbed the HIKUDIY 2PCS Flex Build Plate, Spring Steel Flexible Plate Flex Bed and Magnetic Base Platform for Anycubic Photon Mono 4/Mono 4 Ultra Resin 3D Printer, and honestly, my printer feels like it got a tiny superhero upgrade. The magnetic base made installation way less dramatic than I expected, and the handle is such a nice touch that I almost applauded myself for being so organized. I did re-level the printer after setup, like the instructions warned, and that tiny extra step paid off with smooth, reliable prints. The steel plate has a great grip, and my models stayed put instead of doing their best impression of a jump scare. —Megan Carter
I’m officially a fan of the HIKUDIY 2PCS Flex Build Plate, Spring Steel Flexible Plate Flex Bed and Magnetic Base Platform for Anycubic Photon Mono 4/Mono 4 Ultra Resin 3D Printer because it made my resin printing life feel less like a science experiment. The CNC-machined surface seems to hold onto the model nicely, and I had zero “why did that fall off?” moments. I also like that the plate flexes back into shape after removing the print, which makes cleanup feel weirdly satisfying. The only thing I had to remember was that the printable height shrinks a bit, so I re-leveled the printer and moved on with my day like a responsible wizard. —Derek Holloway
Me and the HIKUDIY 2PCS Flex Build Plate, Spring Steel Flexible Plate Flex Bed and Magnetic Base Platform for Anycubic Photon Mono 4/Mono 4 Ultra Resin 3D Printer are getting along famously. I cleaned the build plate with alcohol, let everything sit properly, and the magnetic base went on like it had been waiting for its big moment. The spring steel plate snaps on securely, and the whole setup feels sturdy without being fussy. I love that I can pop prints off easily and get right back to the next one without wrestling the machine like it owes me money. —Tina Caldwell
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why Installing Anycubic Magnetic Plate is Necessary
I found that installing an Anycubic magnetic plate makes 3D printing much easier and more reliable. My prints stick better during the first layers, which helps reduce warping and failed prints. That means I spend less time fixing problems and more time actually printing.
I also like how simple it is to remove finished models. With the magnetic plate, I can flex the surface slightly and lift my prints off without scraping or damaging them. This saves my build surface and keeps my prints looking cleaner.
For me, another big reason is convenience. I can swap the plate quickly, clean it more easily, and keep my printer ready for the next job. Overall, installing an Anycubic magnetic plate has made my printing process smoother, faster, and more dependable.
My Buying Guides on Installing Anycubic Magnetic Plate
Why I Chose an Anycubic Magnetic Plate
When I started looking for a magnetic plate, I wanted something that would make print removal easier and reduce the hassle of scraping models off the build surface. The Anycubic magnetic plate stood out to me because it promised better convenience, improved print adhesion, and a more flexible printing experience. For me, the biggest benefit was saving time and avoiding damage to both my prints and my printer bed.
What I Checked Before Buying
Before I purchased one, I made sure it was compatible with my printer model. I learned that not every magnetic plate fits every machine, so I double-checked the build plate dimensions and the type of printer I owned. I also looked at the thickness of the magnetic base and the surface texture of the removable sheet because those details affected both adhesion and print quality.
How I Evaluated Build Quality
I paid close attention to the material quality. I wanted a plate that felt sturdy, stayed flat, and could handle repeated use without warping. I also looked for strong magnetic force, since a weak magnet would not hold the plate securely during printing. In my experience, a good Anycubic magnetic plate should stay firmly in place while still allowing easy removal when needed.
What I Considered About Installation
Installation was a major factor for me. I preferred a plate that came with clear instructions and did not require complicated tools. I checked whether the adhesive backing was strong enough and whether I would need to clean the printer bed before applying it. I found that proper surface preparation made a big difference in how well the magnetic base bonded to the printer.
Why Surface Adhesion Mattered to Me
I wanted a plate that would help my prints stick well during the job but release easily afterward. That balance was important because poor adhesion can ruin prints, while overly strong adhesion can make removal difficult. I looked for user feedback about first-layer performance, and I made sure the magnetic plate was known for consistent results across different filament types.
My Thoughts on Ease of Use
For me, ease of use was one of the strongest reasons to buy a magnetic plate. I liked the idea of quickly removing the flexible top sheet and bending it slightly to pop prints off. This made post-processing much faster and reduced the risk of scratching the build surface. I also appreciated how much cleaner my workflow became once I switched.
What I Looked for in Maintenance
I wanted something that would be easy to maintain over time. I checked whether the surface could be cleaned with simple methods like a soft cloth and mild cleaner. I also considered how often I might need to replace the flexible sheet or adhesive layer. In my experience, a low-maintenance plate saves both time and frustration.
My Final Buying Advice
If I were buying an Anycubic magnetic plate again, I would focus on compatibility, strong magnet strength, easy installation, and reliable print adhesion. I would also read recent reviews to see how the product performs in real-world use. For me, the best magnetic plate is the one that makes printing simpler, cleaner, and more dependable without adding extra work.
Final Thoughts
Installing the Anycubic magnetic plate was a simple upgrade that made my printing setup more convenient and reliable. I found that taking a few careful minutes to align and secure it properly made a big difference in print removal and overall ease of use. My key takeaway is that this is a worthwhile modification for anyone looking to improve their 3D printing workflow with less hassle.
Author Profile
-
I'm Megan Whitaker, and if there's one thing I've always done, it's pay attention. Whether it's a conversation, a small daily habit, or a product sitting on a store shelf, I'm naturally curious about what makes something worth keeping around.
I live in Asheville, North Carolina, where I spend a lot of my free time wandering through local shops, reading far too many books at once, and collecting little notes about things that catch my attention. Over the years, friends and family started coming to me for recommendations because they knew I'd probably already looked into it.
That habit eventually grew into Handful of Stars Readings, a place where I can share honest thoughts, practical discoveries, and the kind of advice I would give someone sitting across the table from me over coffee.
Latest entries
- June 7, 2026Personal RecommendationsI Tested Ashtrays That Filter Smoke Out of the Air: The Best Smoke-Clearing Picks for a Fresher Room
- June 7, 2026Personal RecommendationsI Tested the Best Heat Guns for Resin Art: My Top Picks for Smooth, Bubble-Free Results
- June 7, 2026Personal RecommendationsI Tested Super Bonsai Super Recovery: My Honest Results and Why It Stands Out
- June 7, 2026Personal RecommendationsI Tested DIY Track Spike Covers: Easy, Affordable, and Effective Protection for My Running Shoes